GPU Support Triangle Pattern
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Prevents GPU sag and looks cool
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 72
- Wydruki
- 0
- Wyświetlenia
- 710
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
If you get value from my work, consider supporting me at stu142.com/supportme
This is a GPU Support that I designed to help prevent sag. It is placed under the corner of the GPU and extends to the bottom of your PC case, and I think it looks pretty cool.
I have included a large selection of sizes, so measure the vertical distance to where you would like your graphics card to be and select that size.
Ensure there is no interference with GPU fans.
Optional Extras:
- A 2mm thick rubber sheet can be cut to size and stuck or glued to the bottom to provide grip.
- 6mm x 2mm magnets can be pressed or glued into the bottom using the magnet adapter printed piece.
My Print Settings:
- PLA or PETG work fine
- minimum 3 perimieters
- 10% infill
- 0.2 mm layer height
- Brim
Materials Used (Affiliate):
Polymaker Polylite PETG Teal: Amazon
2mm Rubber: Amazon
6mm x 2mm magnets: Amazon
Alternative Material Options:
Polymaker Polyterra PLA: Amazon