Trelock bike light to Garmin mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
As the original Trelock mount doesn't really fit the carbon aero cockpit on my Canyon roadbike I decided to make…
- Ocena
- 0 / 5
- Polubienia
- 20
- Pobrania
- 102
- Wydruki
- 0
- Wyświetlenia
- 1634
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution
This is an old design that I imported from my prints on Thingiverse.
As the original Trelock mount doesn't really fit the carbon aero cockpit on my Canyon roadbike I decided to make something myself.
I never liked to have the light off center and the Garmin mount is in the center already.
So I made a Trelock mount that fits on the Garmin mount.
The 4 parts make the light fully adjustable left-right and up and down.
They slide and twist together and are fixed with a 15mm m3 bolt and nut.
I have printed the parts in the orientation as in the STL files. That way it doesn't need much support (parts 2, 3 and 4) and the support that is needed is easy to remove.
I have a Trelock LS 750 but it should work with most Trelock bike lights.
My printer isn't that great (my old printer that I had before my Prusa) so I had to sand some edges to make everything move freely.
EDIT:
I have uploaded a modified part4 (v2) with a little thicker base to make it vibrate less while riding.
And added a part4 with a 14 degree angle to make it work on my mtb.
Category: Sport & Outdoors