1 / 5
Standing Mount for Unifi AP In-wall U6 (U6-IW-US) — zdjęcie 1
1 / 5

Standing Mount for Unifi AP In-wall U6 (U6-IW-US)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a standing mount to allow you to use the Unifi AP In-wall U6 (U6-IW-US) without wall mounting it.

Ocena
5 / 5
Polubienia
25
Pobrania
276
Wydruki
3
Wyświetlenia
1824
Oceny
3

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Electronics
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This is a standing mount to allow you to use the Unifi AP In-wall U6 (U6-IW-US) without wall mounting it. I have one at each end of my house facing inwards and hide on shelves like most consumer APs. I liked the features of the U6 in-wall being POE powered and including 4 additional network ports. The U6 Pro, U6+, and U6 mesh unlike their predecessors have no additional network ports.

 

This mounts works great printed in PLA or PETG. ABS or ASA is overkill.

 

Printed in black (also in white) PLA at 0.2mm layer height, 25% infill, no-supports required. Just print upright.

 

Required hardware, two M3*12mm flathead bolts and two M3 nuts.

Tagi