Liczymy pasujące modele…
An unofficial wall arm mount for the Ubiquiti Unifi U6 Enterprise, U6 Pro, U7 Pro Max and U7 Pro. The holes on the arm align themselves with the holes marked with “A” in the metal face plate “U-PRO-MP”. I've also shared the .step file if…
A replacement for the mounting plate that came with my UniFi U6 Lite access point. Handy if you bought an AP second hand without its plate or lost it in a move. Fits (confirmed by people who printed it, thank you!) - U6 Lite - U6+ - U7…
Replacement mounting plate. Indices on the inside for easy orientation. Small grooves in the mounting slit which prevent spontaneous dislodgement whilst still allowing for tool free attach- and detachment.
Just a rescale of the OG model to fit the UP 6 pro mounting bracket holes—they lined up perfectly and secured easy with short M3 screws. + nuts.
I am using it with U6-Pro, but should also work with AP AC Pro. Instead of snap fits to attach a backplate this remix has 4mm holes so screws can be used to attach a backplate. Added also version with longer stand to fit U7-Pro AP as it…
Hello Everyone I designed two types of stands for Ubiquiti UniFi U6+ (U6-PLUS) Access Point. The stand is compatible with other UniFi AP models that have a dimension of Ø160 x 33 mm (U6-Lite, AC-Lite). I chose the optimal tilt angle of…
A small stand to prop up a Unifi WiFi 6 Long Range AP for placing on a desk/shelf/table. Print Settings Printer Brand: AnkerMake Printer: AnkerMake M5 Rafts: Doesn't Matter Supports: No Resolution: 0.2mm Infill: 10% Filament: Generic PLA…
You can donate here: https://www.paypal.com/donate/?hosted_button_id=BTTC6BR69RRAL In my old installation, I used a wifi access point on a shelf at the same time as a switch. Since ubiquiti doesn't offer this option and I don't want to…
I created this wall mount spacer to accommodate a cabinet or closet where… ethernet comes out of a grommet hole, perhaps with other wires, and you wish not to cover the hole a cut-out exists, but not a gang box/frame and you wish to cover…
Unifi's 'UFO' WAPs have their antennas optimized for ceiling-mount applications. This mount allows you to wall mount them in the correct orientation. It doesn't require the original mounting ring (great for used WAPs without mounting…
This is a corner mount for the Ubiquiti Unifi U6-Mesh (and UAP-Flex-HD) access point. We needed to mount a UAP Flex externally, and wanted to get the best possible coverage by using an outward corner, so remixed the referenced models to…
Updated V2.0 Version now available. Better Printability due to some geometry changes Refined dimensions Integrated Spacing for the Backplate to allow natural airflow to cool the Unit.…
Stand for Ubiquiti U6-LR-US WiFi6 wireless access point. Use #8 sheet metal screws to mount metal plate to stand. [OPTIONAL] Use #6 sheet metal screws to mount Power Injector to back. Print with extra perimeters (4-5). NOTE (14Dec2022):…
Ubiquiti U6+, U6 Lite and AC Lite UFO stand
Added holes for U6+ mounting bracket and added additional cable routing options.
---------------------------------------------------------------------------------------- CHECK OUT THE NEW & BETTER VERSION IN THE REMIXES! NEUE & VERBESSERTE VERSION IN DEN REMIXES ONLINE!…
I wanted to mount my U6+ to the wall - but in a horizontal orientation. So I designed this thing. It will be mountable with all included hardware from the U6+.
This is a remix of Kai's Octagon Box Mount merged with hadigar's U6 Lite replacement mounting plate. Simplifies CamS' solution into a single printed item (no additional screw required). The standoffs for the octagon box have been removed…
This wall mount bracket is specifically designed for the Unifi Access Point U6+, allowing you to mount the device on a wall while maintaining the same orientation as a ceiling installation. The bracket uses the mounting hardware that…
This 1-gang wall plate is compatible with the following Ubiquiti model cameras and APs. FlexHD AP U6 Mesh AP G3-Flex Camera G5-Flex Camera
This is a standing mount to allow you to use the Unifi AP In-wall U6 (U6-IW-US) without wall mounting it. I have one at each end of my house facing inwards and hide on shelves like most consumer APs. I liked the features of the U6 in-wall…
Small stand for Unifi wifi 6 lite accesspoint for vertical (temporary) placement. simply use pair (or 4) nuts&bolts to assemble
Das ist ein Case für die Montage einer Ubiquiti U6 Enterprise In-Wall Damit kann die U6 Enterprise einfach an die Wand geschraubt werden und das Netzwerk Kabel nach unten herausgelegt werden. Habe für die Montage wieder M3 Gewindeeinsatz…
UniFi U6 Pro Desk Stand Use M3 screws to attach everything as shown on photos. Screw holes are smaller than M3 screws and are intented to be threaded. I recommend to use PETG for durability as U6 Pro is quite heavy. There is no need for…
Inspired by Magu's https://www.printables.com/model/323661-ubiquiti-u6-liteu6-lr-mounting-plate. No matter how hard I tried, or tweaked it it did'nt work with my AP's - possibly my printer Anyways, designed it from scratch in F360 and…
Print with: no supports 2 wall loops 10% infill Update: these APs get hot, I would recommend not printing in PLA and instead use a material that can better withstand the heat. I reprinted in PC.
Original model description: Replacement mounting plate. Indices on the inside for easy orientation. Small grooves in the mounting slit which prevent spontaneous dislodgement whilst still allowing for tool free attach- and detachment.…
Thank you for supporting me! This is another free 3D model made available for you. I love sharing my models, but designing, testing, polishing, uploading and maintaining them is a lot of work. In case you enjoy this model, please leave a…
I remixed a UniFi 6E AP mount to work on Ikea Skadis. I saw another mount for this AP on the site, but it was not horizontal, which is what the radiation patterns on UniFi APs are optimized for (they are generally meant to be mounted on a…
All you need are H/Ws come with the AP plus five screws with wall anchors. Suggest adding four spacers (see pic #5) for better heat dissipation for this monster.
This model is a remix of https://www.thingiverse.com/thing:2975884/remixes It has an improved ventilation holes on the back because the last model suffocated. I have also removed the banana connectors on the output and left only the…
Based on the original model UniFi6 In-Wall Wall Mount Spacer U6-IW-US
These spacers allow a Ubiquiti Access Point U6 In-Wall (U6-IW-US) to be spaced out from the wall a bit on a single gang electrical box. This allows the use of deeper mounting screws ( e.g. , panhead screws that won't fit inside the…
I use a MPU6050 to calibrate the Input Shaper of my printers, so i've modeled this to make the process easir. Just print it in the middle of the bed, then screw the MPU.
A holder for a Unifi Enterprise Access Point. Print settings: You need to add modifiers around the hooks. I added spherical modifiers with 100% infill. All other infills are at 15% supports needed The 3mf file should already include the…
This a stand for Unifi U6-Lite to hold it vertically, to avoid drilling the wall. Also it provides a support to place AP over any cupboard or shelf. Choosing the right color will help hiding the print.
Jakeu's Tofu60 (Redux) Wrist Rest IMPORTANT: In order to print this model, you'll need at least 256x256x80 mm of space on your bed You'll have to install 3M™ Bumpon™ SJ5344 rubber bumpers (19.1 x 4.1 mm) for it not to slide on your desk…
A simple case for new black pill dev board (version with stm32f411x, should be compatible with stm32f401x, not to be confused with old black pill with stm32f103). No screws needed, top should snap on the bottom. Bottom holes should fit…
This is an updated version of the housing I made for a Uctronics U6223 DC buck converter (like this one: https://www.amazon.com/dp/B07XXWQ49N ). The board accepts 9v - 36v DC and outputs 5v - 5.2v DC at about 5A and has a USB type A…
The following model was created because other models for Unifi AP devices I found do not work with the U6 Enterprise model or the model is not strong enough to support the extra size and weight. I created this to more easily mount an…
This is a small and easy to build reaction wheel. I do not recommend building this project to beginners as it is quite hard to stabilize and properly calibrate the PID algorithm. More information about the project: Code can be found on…
------------------------------------------------------------------------------------------------------------- This Stand is only for the U6 ENTERPRISE Model. If you have the normal U6 Model use my other Desk Stand here :…
Mount for U6223 Buck Converter. I purchased buck converter off of amazon.
Known good for: U6+, U6-lite, nanoHD → The U6-Pro has a different mounting bracket, this model does not work with the U6-Pro. → Unknown if this works with the U6-LR or not. This is a remix of a replacement of the original wall/flat…
Print 2 hooks and 1 plate with: Can be printed without supports (but the AP Plate has a 60 degree overhand) 3 wall loops 10% infill I can create variation for the hangers upon request.
Modified the original Pro mount and combined it with the original mounting plate. Many thanks to @Jsmaz3 and @DominikPalo for the original models. I have added a model for the U6+ and one for the AC Pro and U6 Pro Unifi Access Points.…
Distance frame for Unifi U6 series. Based on Tinkercad with more sections, now it's more like a circle. Also changed to heat set inserts for more stability. A few upgrades are planned, with other options for cable insert.
This spacer allows the Ubiquiti U6 In-Wall to be mounted directly on the wall without the need for an electrical box. Recommend settings Layer height: 0.3mm Perimeters: 2 Bottom/Top layers: 5 Infill: 0%
For reasons, I needed a 3D model of my car key, so I made one. I also made it parametric, so you can theoretically set the Bit parameters in Fusion and make a key for any HU66 lock. Key cut details here:…
Ubiquiti Unifi U6 / U7 standing legs, metal mounting plate compatible. Lifts up the access point from the surface for better cooling underneath. I've placed my UniFi AP in the cabinet and realised it was getting quite hot, so decided to…
7-3-26 : Due to changes in the menu structure of the newer Firmware version(s), There's a possibility that some macros point to the wrong function. You can, however, easily edit your own macro's via the Vial editor. The MacroCart is…
Adapter to fit a keystone jack and a short patch cable under a concrete ceiling. Fits for Ubiquiti U6+/U6Plus. Probably also for UAP-AC-LR and similar.
A very simple, but very secure and stable mounting option for an ADXL/MPU6050 module, utilizing the two m3 inserts on the back of the Voron 0.2 x-carriage, which most alternative toolheads (like the amazing dragonburner ) do not utilize.…
Cut the edges off so it fits lying down on the Prusa Mini+ Bed.
This is an adapter that allows you to mount a Unifi U6-Lite access point to the round junction boxes used in residential ceilings. The hardware that comes with it unfortunately does not work for this kind of mount. It's modeled for a 4…
This is a case for the MPU6050 GY521 gyroscope/accelerometer module with fischertechnik connectors. The 2x6 I2C pin connector is pin compatible with ftDuino and fischertechnik TX connectors. See the pictures for assembly details. A…
This print makes your Ubiquiti Unifi access point look like a giant spider (or War of the worlds style UFO if you preferThis print makes your Ubiquiti Unifi access point look like a giant spider (or War of the worlds style UFO if you…
Print in a temperature‑resistant material. PLA will warp within a week. Hardware The screws should ideally be pan‑head or another type with a flat, low‑profile head. 2× M4×10 screws 1× M4×8 screw (only for U7 Pro) 1× cable tie (if you…
Honeycomb storage wall mount for UniFi U6 Enterprise access point. Requires 4 1/8” or M3 screws and nuts. I used the screws that came with the AP and cut them to length. This model is also compatible with other hardware that is mounting…
If you want to mount your access point on a wall or ceiling but don't want a cable hanging down, my mounting base will work perfectly.
As there are only some crap covers for the eyepieces included I made my own protection for the SIG Zulu6 HDX Binos. Printed with TPU.
Print the frame from a hard material, i.e. PET or PLA and snap it onto the external drive. Tolerances are optimized for PLA so check the tolerances for PET first. Print the rubber elements and Push them into the hard plastic frame. They…
A wrist rest designed specifically for the Tofu60 Redux case. The model is oriented to fit on the print bed of a MK3S+.
I needed a way to mount a Ubiquiti U6 Lite AP close to the ceiling but in a way that doesn't require drilling any holes in the ceiling or any other modification to the building. So I came up with this model, that mounts the AP to a pillar…
Aluminiumprofil Nut 6mm 20x20mm Typ B / Aluminum Profile Extrusion 20x20mm U6 Type B Die Länge bitte im Slicer variieren / Vary the length in your slicer: The sky is your limit, or your printers' Z-height … In Onshape suchen nach / look…
Navigation mount for Aoocci U6 unit so it can fit on CF moto 450 mt without any aditional mounts, arms etc that comes in the package. It sits over the main LCD. Best printed in ABS, but you can also try with PETG. Layer height 0.2mm, 3…
After one of my U6 Mesh access points failed and burned a whole into itself, I designed this cap to prevent water from leaking into the device. I added a picture with the hole. I looked with a thermal camera where the hot spots of the…
Through the following link you will get access to my Amazon Store Front, where you will find the shopping list for each project and other product recommendations. https://www.amazon.com/shop/adriancubas As an Amazon Associate, I earn from…
Držák kamery Tapo na zeď, nebo krabičku 68mm
Ubiquiti AP U6 Lite ceiling mounting without drilling into the ceiling was the challenge I solved with this model. Deutsch: Ubiquiti AP U6 Lite Deckenmontage ohne in die Decke zu bohren war die Herausforderung, die ich mit diesem Modell…
I linke the original Design, but at the Moment i dont need to use the Lanports. So tryed to mount it with the upper screws, but it dint fit, so i opended the center. Now it can be mountet to use the Lan Ports and without using them.
iPhone11 Wireless Charging Cradle for NANAMI/U6
A simple 60% keyboard keyboard dust cover designed specifically with the Tofu60 2.0 in mind (asymmetrical top and bottom lips). There's enough space inside to fit 1mm strips of foam for better protection.
Basically designed this to hang from a beam clamp via threaded rod. I am uploaded three versions, one with threaded inserts for the plate itself, one that just relies on the whiz nuts included with the AP (same design as Mauricio's) and…
Here are two, quick attach, hook-on style mounts for the Unifi Access Point (UAP) nanoHD or U6-Plus. With the forward mount, the UAP is held in normal orientation, the "U" logo and LED status light are visible. It also adds 3 mm underside…
Gridfinity Einsatz 2.5x5xu6 um das LCR Meter DER EE DE-5000 gut und sicher zu transportieren. Der Einsatz ist durch die Gyroid-Füllung weich, bietet aber noch genügend halt. Das Raster konnte ich nicht einhalten, 2 ist zu klein, 3 zu…
It's an underdesk mount for the Ubiquiti U6-IW
This is a parametric model of a wall mountable adapter for the Ubiquiti UniFi U6 Enterprise In-Wall accesspoint. The desired wall width can be configured with the “MountingWallWidth” parameter in the Autodesk Fusion project file or…
Simply print it in the center of your print-bed and screw on your MPU6050 sensor while the mount is still attached to the bed. Happy calibrating!
The original model was perfect, but I found out the U6LR has slightly larger diameter so although I managed to put it on, it bent the stand backwards. So I made the leg slightly longer (but will still fit most printer plates). Also the…
Aluminiumprofil Nut 6mm 20x20mm Typ B mit durchgehendem M5 Innengewinde. Kann daher bei Bedarf mit einer M5 Gewindestange verstärkt werden. Die Länge der STL/3MF ist 360 mm bitte im Slicer durch abschneiden variieren, ich habe mich mal am…
This is a mounting bracket to mount a Ubiquiti U6+ Access Point to a 4 inch octagonal box. Nov 2025: I added a version 2 that I'm hoping will work with either an octagonal junction box or the normal rectangular work boxes. I'd appreciate…
Items required: 2 M4 nuts. 1 4pin JST connector. Accelerometer MPU6050. 2 M3x4 heat insert. 2 5mm M3 screw.
I didn't want to mount my AP to the wall so I designed these simple legs/stands Just print 2 of them and screw them into the mounting bracket included in the box for the AP. You can use the M3 screws provided with the AP.
Wall Mount for Ubiquity U6 In-Wall AP on a standard US double gang outlet
I needed to cover the installation box and hang a thermometer somewhere. That's why I created this simple model. Maybe someone else will find it useful.
This remix is the combination of two designs. The UniFi6 In-Wall Wall Mount Spacer U6-IW-US by Shane (printables.com/model/269375-unifi6-in-wall-wall-mount-spacer-u6-iw-us/remixes) and the OnQ Bracket by Nick Berardi…
Working on a dRehmFlight based flight controller, I wanted to mount a MPU6050 IMU onto a protoboard. I put female headers onto the board and plugged in the sensor. Electrically, this is a sound connection. Mechanically, not so much. The…
I had to install a spare Unifi U6+ wifi access point outdoor to connect to various appliances (EV car charger, EV Car, Shelly EM that monitors wind turbine, etc…) U6+ is rated IP 54, then only dust protected + resistant to 10 minutes of…
My first print is of the Husqvarna Lawnmower Drivegear HU625AWD in PETG with 2 walls and 100% infill with alternating extra wall. It seems very durable and the wheel engages and spins with no issues. We will see how long it lasts.
Mounting plate compatible with Unifi Wireless Access Points U6 (larger mounting ring) Snaps very securely onto OpenGRID system with 4 multiconnect slots.
This mount is used to use your Tofu65 keyboard on top of your 13" computer without it slipping. I tested it on a 2019 macbook pro. Printed using White PLA at 0.2mm on an Ender 3 V3 SE. Use the LR file to print both sides at once, or print…
Clark's original model was for the Unifi UAP-IW-HD. You'd expect that Ubiquiti would reuse the hole pattern for the mounting bracket of the newer U6-IW, but I guess the world needs more e-waste so the hole pattern is of course different…
Tofu60 (Redux) Wrist Rest Split Edition A split version of the Tofu 60 Redux Wrist Rest to support your wrist during gaming. Remixed from the design by fellow enthusiast @jakeu, it features AMS compatibility allowing the user to choose…
The nubs/tabs on the cutlery/silwerware drawer in my Gorenje GU663W dish washer had become worn, to the extent that the drawer kept slipping sideways out of the C-shaped rails on either side. Fed up with this and way too cheap to get it…
Ender 3 V2 resonance mounts for my modified ender 3. The mounts fit a bed that has a magnet sheet mount on it, not the glass and a satsana fan shroud for the extruder. The bed clamps are temporary while the x axis mount can be permanently…
This 3D printable mount is designed to securely attach a D3000 discone antenna to a standard camera tripod. It fits the antenna snugly and features an integrated PU60-style quick release plate on the bottom for fast and convenient…
Replacement plastic gear for Omnires MURRAY water diverter from MU6132 set. It's a close fit when printed on a SLA printer (prints fine even without being angled, but that may require some sanding (of the bottom/top part only)). Attached…
A simple replacement shelf holder for Gorenje RBIU6092AW fridge to restore shelf support.
