Encanto Bruno's Vision Lithograph
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Encanto movie - Bruno's Vision shards of Mirabel and the Casita
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 99
- Wydruki
- 0
- Wyświetlenia
- 736
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Props
- Licencja
- Creative Commons — Attribution
Remix of the Encanto Bruno's Vision Litho by thedarkotaku88 on Thingiverse: https://www.thingiverse.com/thing:5229694
I imported mesh into fusion 360 and played a bit - I printed this in CLEAR PLA, making it pretty thick with infill - I didn't print as traditional lithograph.
I then used airbrush to paint green - worked great. Hope someone else gets to make a toddler a cool bruno vision prop they like. (threw in the lithograph image also in case someone wants it)
I printed mine with a 15% cubic infill.. it really didn't turn out nicely (you can see hatch pattern even after painting… If I was to do it again, I would recommend using a 100% infill with white PLA (I don't think the clear PLA + paint job worked liked I was hoping)