Voron Trident 250 Mesh Skirts
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mesh Skirts for the 250mm Voron Trident
- Ocena
- 5 / 5
- Polubienia
- 17
- Pobrania
- 122
- Wydruki
- 5
- Wyświetlenia
- 1002
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- GNU General Public License v3.0
Use these files in SuperSlicer to generate two-color meshed skirts. The mesh object is 1.6mm high, so add a PAUSE in your gcode to switch colors at 1.8mm layer height. All parts are oriented flat for printing and easy importing into SuperSlicer. (note: make sure preferred orientation is set to 0, not 45, otherwise the skirt and the infill won't import lined up)
Recommended SuperSlicer settings:
Note: If you're going inverted electronics, you might want to remove the mesh from one of the hexagons so you can stick a finger through to lift up the deck panel (otherwise you'll need to come up with another solution to attach a handle to the deck panel).
Watch this video from Steve Builds for a walkthrough on how to make these
If you like this model and want to give back, please consider buying me a coffee.