IKEA Hack - Marius Stool - Plug
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A little addition to add some color to your IKEA stools.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 36
- Wydruki
- 0
- Wyświetlenia
- 860
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bathroom
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A little addition to add some color to your IKEA stools. Snaps into the holes of the stool and makes it look a whole lot prettier. Doesn't fall out unless you knock it about or press it out.
I found that I have 2 different models of the stool, and they have different size of holes. So I've added a version for the older (smaller) hole as well.
The newer model is ~29.5mm and the older is ~27.6mm. I named the older one "smaller".
https://www.ikea.com/us/en/catalog/products/10135659/
Includes STL, OBJ, GCODE and 3MF of the plug, and a 3MF and GCODE of a bundle of 8 to print a full set for a stool.