1 / 2
Onigiri (おにぎり) - Keychain / Tag - No dual extrusion required! — zdjęcie 1
1 / 2

Onigiri (おにぎり) - Keychain / Tag - No dual extrusion required!

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A tag that says おにぎり.

Ocena
0 / 5
Polubienia
4
Pobrania
20
Wydruki
0
Wyświetlenia
284
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

A simple tag that says おにぎり (Onigiri). 

Onigiri is a Japanese food made from white rice formed into triangular or cylindrical shapes and often wrapped in nori.

To change the colour of the text, you need to pause the print and change the filament. 
The tag has a thin border. If you swap your filament a bit earlier (while the border is still printing), the border will also have it's colour changed. If you look at the model in your slicer layer by layer, it'll become more obvious. 

With Cura and other slicers, you can automatically pause a print at a specified layer, which is really helpful. I suggest this article if you need more information.

More Settings

I scaled it down to about 7cm length. Do not scale it down too much, because the hole might get too small. Otherwise, my print settings were:

  • Infill: Grid 10% 
  • Supports OFF 

Important: You should lay the tag down, do not print it standing up.

Tagi