1 / 2
Onigiri (おにぎり) - Keychain / Tag - No dual extrusion required! — image 1
1 / 2

Onigiri (おにぎり) - Keychain / Tag - No dual extrusion required!

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A tag that says おにぎり.

Rating
0 / 5
Likes
4
Downloads
20
Makes
0
Views
285
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution

A simple tag that says おにぎり (Onigiri). 

Onigiri is a Japanese food made from white rice formed into triangular or cylindrical shapes and often wrapped in nori.

To change the colour of the text, you need to pause the print and change the filament. 
The tag has a thin border. If you swap your filament a bit earlier (while the border is still printing), the border will also have it's colour changed. If you look at the model in your slicer layer by layer, it'll become more obvious. 

With Cura and other slicers, you can automatically pause a print at a specified layer, which is really helpful. I suggest this article if you need more information.

More Settings

I scaled it down to about 7cm length. Do not scale it down too much, because the hole might get too small. Otherwise, my print settings were:

  • Infill: Grid 10% 
  • Supports OFF 

Important: You should lay the tag down, do not print it standing up.

Tags