Munchkin Box Insert - Optimized for Small Printers
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A box insert for the game “Munchkin” that fits onto small print beds because it is split into two parts.
- Ocena
- 5 / 5
- Polubienia
- 23
- Pobrania
- 84
- Wydruki
- 2
- Wyświetlenia
- 1010
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Munchkin Box Insert: Optimized for Small Printers
I wanted to play around with Tinkercad and I made a box insert for the game “Munchkin”. This fits the box of German “Munchkin 1+2” (I do not know whether other boxes share those dimensions or not.)
There is also a small space (8 mm wide) to fit additional cards or small counters.
In contrast to other inserts, I had three design goals:
- Small printers: optimized for small printers (like the Prusa Mini) because splitting existing models often results in very thin walls.
- Stability: so that you can take the insert out of the box regularly to play and use it as a cardholder in the game.
- Easy access to the first card of every pile: I would rather not have a rim around the first cards of a stack, to have easy access to them without lifting the insert.
Printing
I've printed my copy using Prusament Recycled PETG using 0.2 mm layer height and 3 perimeters. No brim or supports are needed.
Ideas for Improvement
- There is no dedicated spot for the D6 die
- The small “buffer” space of 8 mm could be wider
- … ?
The source Tinkercad project can be found here If you want to play around with it and improve it: https://www.tinkercad.com/things/jHG0fbKLt8c-munchkin-insert