DIEGO LED Name Lamp
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
DIEGO as a printable LED name lamp. Print each letter individually, for gluing together with cable entry.
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 71
- Wydruki
- 0
- Wyświetlenia
- 683
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial
“DIEGO” as a printable LED name lamp.
Kudos go to @Thomas_439428 for the inspiration and tutorial videos and also to @MIPI3D for the LED alphabet.
Here a link to the LED alphabet:
https://www.printables.com/model/433236-led-lamp-alphabet
See here for more description also with a german tutorial video if you want to create your own LED name lamp:
https://www.printables.com/model/583368-luca-led-namenslampe-name-lamp
Unlike Thomas, I used Autodesk Fusion 360 for the construction. I made the first entrance hole a little wider. Otherwise, I followed his instructions/measurements but adapted it to Autodesk Fusion 360 (no mesh simplification needed).
I used PETG with 0.2mm on a MK4 with 70% scaling (should not be smaller otherwise the holes are to tight). I used a hot glue gun to join the letters together.