1 / 5

DIEGO LED Name Lamp

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Sascha

@M_a_v

DIEGO as a printable LED name lamp. Print each letter individually, for gluing together with cable entry.

Rating: 0 / 5
Likes: 9
Downloads: 71
Makes: 0
Views: 683
Reviews: 0

Updated at source: Jan 23, 2024

Model information

Source: Printables
Category: Home Decor
License: Creative Commons — Attribution — Noncommercial

Details Files (10)Makes & comments (Makes: 0) (Comments: 0)Remixes (0)Collections (8)

“DIEGO” as a printable LED name lamp.

Kudos go to @Thomas_439428 for the inspiration and tutorial videos and also to @MIPI3D for the LED alphabet.

Here a link to the LED alphabet:
https://www.printables.com/model/433236-led-lamp-alphabet

See here for more description also with a german tutorial video if you want to create your own LED name lamp:
https://www.printables.com/model/583368-luca-led-namenslampe-name-lamp

Unlike Thomas, I used Autodesk Fusion 360 for the construction. I made the first entrance hole a little wider. Otherwise, I followed his instructions/measurements but adapted it to Autodesk Fusion 360 (no mesh simplification needed).

I used PETG with 0.2mm on a MK4 with 70% scaling (should not be smaller otherwise the holes are to tight). I used a hot glue gun to join the letters together.