1 / 4
Ikea 365+ lid holder / shelf hanger
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
5 lids hanger to be fitted under shelfs in the cabinet or storage room
- Ocena
- 5 / 5
- Polubienia
- 42
- Pobrania
- 189
- Wydruki
- 2
- Wyświetlenia
- 1651
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 2) (Komentarze: 2)Remiksy (0)Kolekcje (53)Powiązane
Based on oryginal work of Simon I have created 5 lids hanger to be fitted under shelfs in the cabinet or storage room.
On top there is a lip 19mm (0.74 inch) to be fitted on the back of the shelf. European standard is 18.5 mm so it fits just right.
Printed using Impact PLA with 0.6mm nozzle. 15% infill.
