1 / 3
( Skadis ) Toilet paper holder with tray, i use it in my workshop, but it's designed for the bath — zdjęcie 1
1 / 3

( Skadis ) Toilet paper holder with tray, i use it in my workshop, but it's designed for the bath

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

( Skadis ) Toilet paper holder with a corresponding tray. Mounting with doubled sided tape, screws or on a Skadis board

Ocena
0 / 5
Polubienia
5
Pobrania
77
Wydruki
0
Wyświetlenia
594
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Bathroom
Licencja
Creative Commons — Attribution

A nice curved toilet paper holder with a matching tray. Mountable with double sided tape (recommended), screws (M4) or on a Skadis Pegboard with T-Nuts or hooks. You find all the versions in the files, 

I personally use it in my workshop to store some paper to clean e. g. the printing bed. 

Additionally you find some simple pegboards in the files in case you are in need of this. Otherwise you may look around, there are some other nice Skadis tiles on printables or use a original small board.

For mounting the T-Nut version (invented by 6d6178, https://www.printables.com/de/model/228663-skadis-t-nuts-mounting-system-for-ikea-skadis-pegb). T-Nuts can be found at the T-Nut-System or you use other T-Nuts like e.g. the ones i designed (T-Nuts).

Printing

PLA (any other material should work)

infill 25%

4 perimeters

adaptive layer height recommended

no supports

brim recommended

 

 

 

Tagi