Parametric Mizu's glasses
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mizu's eyeglasses frame from Blue Eye Samurai series.
- Ocena
- 5 / 5
- Polubienia
- 56
- Pobrania
- 223
- Wydruki
- 2
- Wyświetlenia
- 1081
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Cosplay & Costumes in general
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Since I posted this print on my Instagram, I got several questions to share the 3D file, so here it is!
I printed the frame with 0.16 layer height. After printing it I had to do some sanding for a better fit. Once the frame was finished, I temporarily glued it to a piece of glass covered with clear packing tape, and poured tinted clear resin. I used ca. 1mm rod for hinges.
If you post yours on Instagram, tag me lynx.den, so I can see your result :).
I'm keeping my fingers crossed for your cosplays ;).
Edit: I added parametric .f3d file, so that you can adjust dimensions to fit your face. You should mainly focus on the ‘nose_gap’ and ‘rim_diameter’ parameters. The model might break if you change values too much, but it should be fine for most face proportions. If something goes wrong, just hit Ctrl+Z, and try again ;).
My making-of video: https://www.youtube.com/watch?v=yvbNUEpezH4&t=107s