Parametric Mizu's glasses
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Mizu's eyeglasses frame from Blue Eye Samurai series.
- Rating
- 5 / 5
- Likes
- 56
- Downloads
- 223
- Makes
- 2
- Views
- 1,081
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Cosplay & Costumes in general
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Since I posted this print on my Instagram, I got several questions to share the 3D file, so here it is!
I printed the frame with 0.16 layer height. After printing it I had to do some sanding for a better fit. Once the frame was finished, I temporarily glued it to a piece of glass covered with clear packing tape, and poured tinted clear resin. I used ca. 1mm rod for hinges.
If you post yours on Instagram, tag me lynx.den, so I can see your result :).
I'm keeping my fingers crossed for your cosplays ;).
Edit: I added parametric .f3d file, so that you can adjust dimensions to fit your face. You should mainly focus on the ‘nose_gap’ and ‘rim_diameter’ parameters. The model might break if you change values too much, but it should be fine for most face proportions. If something goes wrong, just hit Ctrl+Z, and try again ;).
My making-of video: https://www.youtube.com/watch?v=yvbNUEpezH4&t=107s