Bosch Gba 12v adaptator
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Ksuszka did a great job with his Bosch 12V flashlight. (thanks) I needed an adapter to use the Bosch GBA battery with…
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 78
- Wydruki
- 0
- Wyświetlenia
- 751
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
Ksuszka did a great job with his Bosch 12V flashlight. (thanks)
I needed an adapter to use the Bosch GBA battery with my ts100 soldering iron
I moded the flashlight to use only the part I needed.
I only needed the piece with the male connectors
I inserted a DC jack connector
I did a little circuit to connect the male connectors and the plug, but you can do it with wires
After that I made a little lid
The lid is held with 3 small screws 3x10
The Faston connector are : 1217169-1 from TE
Print Settings
Printer Brand:
Prusa
Printer:
Prusa Clone
Rafts:
No
Supports:
Yes
Resolution:
0,2
Infill:
35
Notes:
supports needed only for the adaptator not for the lid
Post-Printing
You need to drill the adaptator with a drill diameter 3.2 rnrnyou have to tap the lid with a tap of 3
Category: DIY