Unifi Dream Shelf - Vintage Edition
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Basic shelf designed to house a Unifi USG, Flex Mini Switch, and any variation of the AC/U6-Lite, etc. Access Point.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 48
- Wydruki
- 0
- Wyświetlenia
- 899
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I had some spare Unifi equipment laying around that I decided to build a small Unifi stack with to give to a relative. Given the USG's Vintage status I decided to call it a Dream Shelf Vintage edition.
It has enough space to hold a Unifi Security Gateway (USG), Flex Mini Switch, POE adapter, and any of the Access Points that utilize the lite mount such as the Nano HD, AC-Lite, AC-LR, U6 Lite. The shelfs should be large enough accommodate a Gateway Lite (UXG-Lite) should you ever want to replace that aging USG.
The Access Point is mounted through the holes on the top with bolts to hold it in place. The holes are slightly larger than the mount to give some room to adjust alignment if needed. I've also uploaded a second version that does not have AP mount holes if you want to place a Flex HD / U6 Mesh on top or add your own mount holes.
There are some hexagon holes on the each side of the bottom shelf to help with air circulation and three holes on the back of the top shelf if you want to use some zip ties to hold cables together.
Given how much heat the USG puts off I highly recommend this not be printed in PLA. I used PETG CF to just to be safe. Print in the orientation of the model to avoid needing supports.