Raspberry Pi Camera Mount for 5MP Camera with Lights

I've remixed the Ender 3 v2 Z-Axis mount with the Mini Kossel camera enclosure to allow the high res camera with lights to be mounted on the X-Axis motor on the Z-Axis of the Ender 3 v2.

The only model changed was the Camera Back, which can be found in tinkercad here - https://www.tinkercad.com/things/fVf4YspbTTK-pi-camera-back/edit

The original creators said this:

Camera Enclosure

https://www.thingiverse.com/thing:434600

This case and mount for alternate version of Raspberry Pi Camera Kit.

Main different for this camera module support changeable lens and optional IR lens.

For the case , it have two version. One is for camera module only.

One is for camera module with IR or 1W LED .

For the mount. I design two version. One is mount the camera on standard tripod (1/4 inch nut). One is mount on 2020 or 1515 aluminum extrusion.

More information on this camera module , please check in here: http://www.mini-kossel.com/Electronics/pi-camera-module http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=181501216262 http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=181501237185

Instructions

For camera case.

4x M3x16mm screw

4x M3 nut

For Tripod Mount

1x 1/4 inch nut

For aluminum extrusion Mount

2x M3 Nut

2x M3x10mm Screw

For arm using M3 x8mm screw and M3 Nut

Mounting Arm

https://www.thingiverse.com/thing:3294512

Inspired by the camera mount designed by Modmike (https://www.thingiverse.com/thing:2886101) which I printed but couldn't get to fit, I decided to draw my own version. Its a little bit chunkier (the bracket), and the camera enclosure should fit a Raspberry Pi camera V2.1 easily. Doesn't need any support or rafts etc.

Requires a couple of M3 x 15mm hex bolts

Camera bracket:

Print this upside down so that the flat part that sits against the QR code sticks up

Camera back:

Print this flat side down

Camera front:

Print this flat side down

Category: Camera