E3D v6 plus BLtouch mount for Solidoodle 2
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a mount for the E3D v6 hotend and the BLtouch sensor, designed to work on the Solidoodle 2.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 37
- Wydruki
- 0
- Wyświetlenia
- 691
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
This is a mount for the E3D v6 hotend and the BLtouch sensor, designed to work on the Solidoodle 2. This was inspired by the mk5 mount by Lawsy and adapted for the BL touch auto-bed tramming sensor.
I printed this with 20% infill, no supports, and in PLA (and it works just fine). I was expecting to have to print it in ABS, but so far, so good. I did lose about 20 mm from the X-axis, but I don't really miss it. In the future, I may try to figure out a way to replace this lost bed volume with a different endstop configuration. I'm open to suggestions.
Print instructions
Licence: Creative Commons - Attribution Category: 3D Printer Parts Print Settings
Printer Brand: Solidoodle
Printer: Solidoodle 2 - Pro
Rafts: No
Supports: No
Resolution: 0.3mm
Infill: 20%