Korg NTS-1 Honeycomb Stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A snug honeycomb stands for the Korg NTS-1
- Ocena
- 5 / 5
- Polubienia
- 11
- Pobrania
- 134
- Wydruki
- 1
- Wyświetlenia
- 573
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Music
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A snug honeycomb stands for the Korg NTS-1. The print fits like a dream between the unit's corner screws and rubber feet. The unit sits at a 50-degree angle. The unit sits 20mm above the ground for headphone port access and cable clearance typically found with DAW-less setups.
Assembly:
Printed supports are not necessary. To attach the stands, the corner screws must be removed to slide the stand onto the unit.
Notes:
This was printed with the standard 15% infill which results in the stand being easily movable due to its lightweight nature. A possible fix would be increasing the infill percentage but the stand may still be light for aggressive tabletop use.
The same stand structure is available in the Korg NTS-2 Oscilloscope and Korg Volca series. This stand is also available with an extended base to accompany an Arturia Keystep.