Korg NTS-1 Honeycomb Stand
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A snug honeycomb stands for the Korg NTS-1
- Rating
- 5 / 5
- Likes
- 11
- Downloads
- 134
- Makes
- 1
- Views
- 573
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Music
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
A snug honeycomb stands for the Korg NTS-1. The print fits like a dream between the unit's corner screws and rubber feet. The unit sits at a 50-degree angle. The unit sits 20mm above the ground for headphone port access and cable clearance typically found with DAW-less setups.
Assembly:
Printed supports are not necessary. To attach the stands, the corner screws must be removed to slide the stand onto the unit.
Notes:
This was printed with the standard 15% infill which results in the stand being easily movable due to its lightweight nature. A possible fix would be increasing the infill percentage but the stand may still be light for aggressive tabletop use.
The same stand structure is available in the Korg NTS-2 Oscilloscope and Korg Volca series. This stand is also available with an extended base to accompany an Arturia Keystep.