Fluke 115 wall mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a wall mount for a Fluke 114/115/116/117 multimeter. It will hold the meter with (or without) leads installed…
- Ocena
- 5 / 5
- Polubienia
- 11
- Pobrania
- 69
- Wydruki
- 1
- Wyświetlenia
- 605
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Share Alike
NOTE: Imported from Thingiverse without updates…
This is a wall mount for a Fluke 114/115/116/117 multimeter. It will hold the meter with (or without) leads installed in the rear clips. It has two recessed screw holes for 3/16 tapcon concrete screws. The screw holes have a diameter of 6mm with a 3.75mm deep 10mm diameter recess for the screw head.
Instructions
I created this mount with high (50%) fill, normal shells, and a .3mm layer height. It used ~6.5 meters of 1.75mm filament. I believe it would work with less fill but I rather be sure since a drop on the floor would probably break the LCD.
Category: Electronics