Fluke 115 wall mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a wall mount for a Fluke 114/115/116/117 multimeter. It will hold the meter with (or without) leads installed…
- Rating
- 5 / 5
- Likes
- 11
- Downloads
- 69
- Makes
- 1
- Views
- 605
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Share Alike
NOTE: Imported from Thingiverse without updates…
This is a wall mount for a Fluke 114/115/116/117 multimeter. It will hold the meter with (or without) leads installed in the rear clips. It has two recessed screw holes for 3/16 tapcon concrete screws. The screw holes have a diameter of 6mm with a 3.75mm deep 10mm diameter recess for the screw head.
Instructions
I created this mount with high (50%) fill, normal shells, and a .3mm layer height. It used ~6.5 meters of 1.75mm filament. I believe it would work with less fill but I rather be sure since a drop on the floor would probably break the LCD.
Category: Electronics