Adapter for Tenlog power supply
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adapter from the original 360W power supply to a larger power supply with, for example, 600W
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 99
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
I wanted to swap my original 360W Tenlog TL-D3 Pro power supply for a 600W power supply, but I quickly realized that the mounting points didn't fit. The original Tenlog power supply is half as flat as my new power supply.
So I simply created "adapters" and was then able to screw the new power supply onto the old mounting points.
M4 screws are used, I used the ones with a round head and a hexagon socket. the original screws on the outside.
You may want to screw the screws into the printed parts before installation as they go in a bit tight.
There is a large and small version, I actually only created the small one to test whether the holes fit, I left it installed straight away