Adapter for Tenlog power supply
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Adapter from the original 360W power supply to a larger power supply with, for example, 600W
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 11
- Makes
- 0
- Views
- 99
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Share Alike
I wanted to swap my original 360W Tenlog TL-D3 Pro power supply for a 600W power supply, but I quickly realized that the mounting points didn't fit. The original Tenlog power supply is half as flat as my new power supply.
So I simply created "adapters" and was then able to screw the new power supply onto the old mounting points.
M4 screws are used, I used the ones with a round head and a hexagon socket. the original screws on the outside.
You may want to screw the screws into the printed parts before installation as they go in a bit tight.
There is a large and small version, I actually only created the small one to test whether the holes fit, I left it installed straight away