Ninjas 5015 fan shroud attachment
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I originally printed sh0tybumbati design for my upgraded geeetech i3x build part cooler when i did not have a 5015…
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 480
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
I originally printed sh0tybumbati design for my upgraded geeetech i3x build part cooler when i did not have a 5015 fan. It worked fine but i had ordered the 5015s before hand so after they arrived I didn't like the color of just black. I ended up cutting the housing off the 5015 fan besides the back piece but did trim it down to fit inside sh0tybumbati housing. I then took his top cover and moved the hole to accommodate the 5015 inside its housing. I used super glue to fasten the fan inside the back housing. I would recommend raising the z height slightly to prevent the fan blades rubbing on the lid. I sanded mine down as i already had the back housing printed. Thanks for the original design sh0tybumbati!
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
No
Supports:
No
200
Infill:
38
Filament:
PolyMaker PETG
Category: 3D Printer Accessories