Ninjas 5015 fan shroud attachment
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I originally printed sh0tybumbati design for my upgraded geeetech i3x build part cooler when i did not have a 5015…
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 13
- Makes
- 0
- Views
- 481
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
I originally printed sh0tybumbati design for my upgraded geeetech i3x build part cooler when i did not have a 5015 fan. It worked fine but i had ordered the 5015s before hand so after they arrived I didn't like the color of just black. I ended up cutting the housing off the 5015 fan besides the back piece but did trim it down to fit inside sh0tybumbati housing. I then took his top cover and moved the hole to accommodate the 5015 inside its housing. I used super glue to fasten the fan inside the back housing. I would recommend raising the z height slightly to prevent the fan blades rubbing on the lid. I sanded mine down as i already had the back housing printed. Thanks for the original design sh0tybumbati!
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
No
Supports:
No
200
Infill:
38
Filament:
PolyMaker PETG
Category: 3D Printer Accessories