"FilaGrip" - Calliper Clip for Easy Estep Callibration
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
"FilaGrip" - The clip attaches to your caliper for quick and accurate e-steps calibration.
- Ocena
- 0 / 5
- Polubienia
- 17
- Pobrania
- 49
- Wydruki
- 1
- Wyświetlenia
- 443
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
Meet FilaGrip – the game-changer in 3D printing calibration.
This hinged clip attaches seamlessly to your caliper, offering a hassle-free solution for precise filament extrusion measurement.
Say goodbye to guesswork and tedious cuttings, markings and flaky measuring – FilaGrip ensures accuracy for flawless 3D prints. No more cutting the filament to measure it.
You'll need a ~2.5cm long, ~1.5mm wide nail for the hinge, and some double sided tape to mount the clip to the caliper.
Here's how to use it once the clip is assembled to the caliper:
1) - Place the top jaw of the caliper on a flat part, perpendicular to your extruder/filament inlet.
2) - Extend the caliper by ~130mm and close the clip with the filament in it.
3) - Send command to extrude 5mm of filament to remove any slack in filament between the caliper and extruder.
4) - Zero the caliper.
5) - Send command to extrude 100mm of filament and read the result.
6) - Repeat steps for 1-5 for 5-10 times to get an average reading.
Upgrade your calibration experience with FilaGrip and redefine precision in every project.
---
I put in a lot of design, testing and engineering hours into all my projects, while keeping my designs free and available for all.
Please consider buying me a coffee to show your support and don't forget to leave a like and share your prints!
Stay tuned for the 3mm*(2.85mm) and GT2 versions!