Gridfinity soldering iron tip holder with locks, 16 holes
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
7mm hole diameter
- Ocena
- 4,909 / 5
- Polubienia
- 56
- Pobrania
- 477
- Wydruki
- 12
- Wyświetlenia
- 1007
- Oceny
- 11
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
About
I wanted to have more compact version for more tips with option that tips will not fall off if held sideways or upside down.
I took original ‘Bin - 1x1x3 - pmcquay.stl’, added fill and holes with tiny locks inside the holes that help to keep those tips in place.
Please give a like and post makes and provide comments for further improvements.
Known limitation
if some tips still fall off then I suggest to add a tiny drop of hot glue on the wall of the hole and putting tip into it. Usually those are very thin like less than 6.5mm
if your soldering iron tip do not fit at all then you can use a drill to make a hole a bit bigger, but better have more perimeters than 4.
Dimensions:
width: 42mm (gridfinity)
depth: 42mm (gridfinity)
height: 3 units of gridfinity height
magnets 6x2mm
holes 7mm wide
Print:
notice gcode contains moves for my custom timelapse video capture (print head moves to back and then to Z axis), so provided gcode file is just for rough estimation of the print time + required filament,
I suggest 0.2mm layer height, 0.4mm nozzle, otherwise tolerances may be way off.
infill whatever you like but 10% is enough
no supports, no brim