1 / 2
Palago Tiles for manual filament swap — zdjęcie 1
1 / 2

Palago Tiles for manual filament swap

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Tiles for a neat print-yourself game

Ocena
5 / 5
Polubienia
14
Pobrania
48
Wydruki
0
Wyświetlenia
601
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Board Games
Licencja
Creative Commons — Attribution

I've been meaning to print myself a copy of Palago for ages now, but alas, when I finally started on it the other day I had to realize that the single color version by IWorkInPixels didn't fully match up between the corner and the angled sides of the straight.

So I quickly whipped up a tile design in F360 and while at it slightly reduced the material cost and print durations.

Whole thickness is now 2mm, with a possible color swap at 1.6mm. Side length is still 20mm. The tiles feel solid (and pretty much are) but take up way less space and print faster too.

The rules of the game can be found here.

Tagi