1 / 2
Palago Tiles for manual filament swap — image 1
1 / 2

Palago Tiles for manual filament swap

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Tiles for a neat print-yourself game

Rating
5 / 5
Likes
14
Downloads
48
Makes
0
Views
601
Reviews
1

Updated at source:

Model information

Category
Board Games
License
Creative Commons — Attribution

I've been meaning to print myself a copy of Palago for ages now, but alas, when I finally started on it the other day I had to realize that the single color version by IWorkInPixels didn't fully match up between the corner and the angled sides of the straight.

So I quickly whipped up a tile design in F360 and while at it slightly reduced the material cost and print durations.

Whole thickness is now 2mm, with a possible color swap at 1.6mm. Side length is still 20mm. The tiles feel solid (and pretty much are) but take up way less space and print faster too.

The rules of the game can be found here.

Tags