Skadis Vertical Power Strip Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Vertical power strip mount for Ikea skadis. Works for multiple lengths. Max size: 5.35 cm × 3.8 cm (2.1 × 1.5 inches)
- Ocena
- 4,75 / 5
- Polubienia
- 54
- Pobrania
- 442
- Wydruki
- 6
- Wyświetlenia
- 2183
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
Max power strip size: 5.35 cm × 3.8 cm (2.1 × 1.5 inches). You can use it with smaller strips. My is 5.2 cm x 3.7 cm, and it fits great. If you're not sure, print stabilizer first — it's small and lets you test fitment.
You can use various power strip lengths, just change the number of stabilizers.
On the bottom there is a route for the cable. If you are brave, you can also make a hole on the back of the strip and route the cable through it directly to the skadis hole. Pairs great with my Skadis Hooks.
I wanted to design the top part too, but it's very stable without it, and it wouldn't be universal. I also like how it lets you slide the strip out when you need to.
Printing
I used tree supports. Support on the top of the triangle is not needed, I recommend adding a support blocker if your slicer keeps adding it.