1 / 4
Upgraded Shelf and Drawer for Anycubic Kobra 2 Pro/Max — zdjęcie 1
1 / 4

Upgraded Shelf and Drawer for Anycubic Kobra 2 Pro/Max

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This storage is meant for the filament holder to be front loading.

Ocena
4,667 / 5
Polubienia
166
Pobrania
1192
Wydruki
6
Wyświetlenia
5171
Oceny
6

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

I recommend printing this model with the shelf at 45 degrees with some basic supports to prevent it from falling down.

My settings:

Shelf: 2 parameters, 15% gyroid infill.

Drawer: 1 parameter, 15% gyroid infill.

Tagi