Parametric cable Y-splitter casing
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A casing to cover up the soldered joints of a cable with an Y-split, parameterized in OpenSCAD.
- Ocena
- 0 / 5
- Polubienia
- 15
- Pobrania
- 222
- Wydruki
- 0
- Wyświetlenia
- 851
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A simple casing to protect and cover up the solder joints of three cables that are joined together in a Y-split configuration. Since I wanted strain relief on the cables, and cables have different diameters, I created a model in OpenSCAD and configured it for the OpenSCAD customizer.
The STL file in the “Files” section is therefore an example. For an Y-splitter casing that is adjusted for your particular cables, you will want to download the OpenSCAD source and change the settings.
The two shells are screwed together with three self-tapping screws. The dimensions of these screws can be adjusted with the OpenSCAD customizer too. Because these are self-tappers, I recommend 4 perimeters.