Cable Guide for Ender 3 Belt Driven Z
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replaces tensioner Clamp on Belt Driven Z mod to guide the toolhead cables.
- Ocena
- 0 / 5
- Polubienia
- 40
- Pobrania
- 128
- Wydruki
- 0
- Wyświetlenia
- 1128
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- GNU General Public License v3.0
This cable guide replaces the small tensioner clamp on the left gantry part of KevinAkaSam's Belt Driven Z Mod for the Ender 3 (https://kevinakasam.com/). It prevents the cables from touching the bed while printing. It has small notches to secure the cables with 2.5mm zip ties.
I designed it to fit version 3.3 of the gantry part, however it should also fit the newest version v3.7. If you need a different length or different notch sizes just let me know. I used the same screws as for the original part to attach it (only 2mm more length required).
Print settings:
I printed it in PETG with 3 walls, 0.2mm layer height and 20% infill. Only the two arcs where it attaches to the gantry need support. The notches and holes should print fine without supports.