1 / 5
Coro Mounts for 21.5mm Pipe
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Various mounts for 21.5mm pipe (Can also be used for 20mm pipe)
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 23
- Wydruki
- 0
- Wyświetlenia
- 221
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Share Alike
A Selection of parts to help you mount your Christmas / Halloween pixel coro using 21.5mm or 20mm pipes. Including a template so you can mark where to drill holes for your cable ties.
Compatible with 3.6mm cable ties.
I also normally hold the pipe in place with a vine-eye screwed into the parts.
Have lots spare in your parts bag as they are very useful for mounting,
Included parts
- Thin Standoff - used to hold a single pipe in one direction
- Standoff Cross - Combine two or three pipes in a cross.
- Standoff Double - Two pipes separated from each other
- Pipe Thingy - Couldn't think of anything better to call this, but use it to simply go over a pipe to hold an object in place
- Hole Template - Position and mark to aid with drilling holes for cable ties in your coro.
Printing
I print with PETG with at least 4 perimeters and a higher density infill (50%) for extra strength. YMMV.