1 / 5
Coro Mounts for 21.5mm Pipe
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Various mounts for 21.5mm pipe (Can also be used for 20mm pipe)
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 23
- Makes
- 0
- Views
- 221
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Share Alike
A Selection of parts to help you mount your Christmas / Halloween pixel coro using 21.5mm or 20mm pipes. Including a template so you can mark where to drill holes for your cable ties.
Compatible with 3.6mm cable ties.
I also normally hold the pipe in place with a vine-eye screwed into the parts.
Have lots spare in your parts bag as they are very useful for mounting,
Included parts
- Thin Standoff - used to hold a single pipe in one direction
- Standoff Cross - Combine two or three pipes in a cross.
- Standoff Double - Two pipes separated from each other
- Pipe Thingy - Couldn't think of anything better to call this, but use it to simply go over a pipe to hold an object in place
- Hole Template - Position and mark to aid with drilling holes for cable ties in your coro.
Printing
I print with PETG with at least 4 perimeters and a higher density infill (50%) for extra strength. YMMV.