Firefly Shell Caddy - 6 Capacity (Single and Twin)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Shell holders for Colonel Wasp Firefly shells. Single caddy (holds 6 shells) and Twin caddy (holds 12 shells) variants.
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 74
- Wydruki
- 0
- Wyświetlenia
- 670
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Material List (per caddy-mounting plate set)
- 3mm elastic paracord / bungee cord (around 8mm for Single and 14mm for Twin)
- 2 x 10/32 x 1-¾ inch machine screws
- 3x M3x4mm
- Wire Hanger or other metal rod < 3mm in diameter (22.5mm for Single, 77.5mm for Twin)
Instructions
1) Take your printed parts and make sure there are no sharp edges.
2) Screw a M3x4mm screw into the hole near the top of the Pressure Tab.
3) Align the Pressure Tab(s) into the groove in the center of the Caddy, and thread the Wire Hanger/metal rod though the holes as an axle. Use the last 2 M3x4mm screws on either end of the axle hole to prevent the wire hanger from escaping.
4) Thread the elastic through the Caddy and the hole on the back of the Pressure Tab, using the holes on the front of the Caddy as anchor points. The Pressure Tab should hold its position away from the back wall of the Caddy, and have resistance to being moved forward.
5) Attach the Caddy to a Plate Mount, using the 2 10/32 x 1-¾ in machine screws.
- Each Caddy will require one Plate Mount part. Included is a blank Plate Mount if you want to add your own mounting design.
- The Single will use x1 Pressure Tab pieces, the Twin will use x2 Pressure Tab pieces.
- Included is the Fusion360 .f3d and .step files for modifying.
References
- Plate Mount design is a remixed version of Seashell_Solus451's molle plates (found here: https://www.printables.com/model/227004-zinc-holster/files). The Caddies will fit their plates as well if you want to use molle instead of a belt.
- Colonel Wasp's shell design.