1 / 3
Railcore 300ZL single acrylic door mag latch and door pull set
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple handle and mag latch set. Print one handle and two latches. Needs two 15x2mm disc magnets .
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 160
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
Print at least two latches and one door pull. Set latches at desired location, mark, and drill with 3mm drill bit. Superglue magnets to door pull. Once dried, attach second magnet(s) to each mag latch, apply superglue, and press into frame.