1 / 3
Railcore 300ZL single acrylic door mag latch and door pull set
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Simple handle and mag latch set. Print one handle and two latches. Needs two 15x2mm disc magnets .
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 12
- Makes
- 0
- Views
- 161
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Public Domain
Print at least two latches and one door pull. Set latches at desired location, mark, and drill with 3mm drill bit. Superglue magnets to door pull. Once dried, attach second magnet(s) to each mag latch, apply superglue, and press into frame.