SPAMF M3 STANDOFFS
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Racerethan on Printables and someone on thingiverse also tried this but I wanted to do my own and provide pics.
- Ocena
- 5 / 5
- Polubienia
- 35
- Pobrania
- 123
- Wydruki
- 3
- Wyświetlenia
- 1009
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Multiple other designers have tried these but I really wanted to make some that are tested and have pictures. I tried some on thingiverse but those were too tight so I just took caliper measurements and designed these directly off of the SPAMF parts. I used some M3 screws from the spare parts bag fromm the Prusa MMU. M3 by 10 screws are too long to use two of them for the short ones so I used a short screw with it. these hold the blaster together very solidly. I used PLA and printed them without a brim. If your printer isn't tuned you may need some sandpaper :)