SPAMF M3 STANDOFFS
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Racerethan on Printables and someone on thingiverse also tried this but I wanted to do my own and provide pics.
- Rating
- 5 / 5
- Likes
- 35
- Downloads
- 123
- Makes
- 3
- Views
- 1,009
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Other Sports
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Multiple other designers have tried these but I really wanted to make some that are tested and have pictures. I tried some on thingiverse but those were too tight so I just took caliper measurements and designed these directly off of the SPAMF parts. I used some M3 screws from the spare parts bag fromm the Prusa MMU. M3 by 10 screws are too long to use two of them for the short ones so I used a short screw with it. these hold the blaster together very solidly. I used PLA and printed them without a brim. If your printer isn't tuned you may need some sandpaper :)