21 models
Super Spamf folding stock. You'll need the original Spamf kit, the Super Spamf kit, and then Telcon's top rail set. One of the rear pieces for the top rail kit is replaced by the adapter piece here- default, it folds to the left. Mirror…
Printed 20mm and 12mm hex standoffs for the SPAMF homemade nerf blaster. I have not physically printed this yet, but I have used the same M3 hole dimension as my metric printed standoffs for the caliburn. I think it should be fine. I also…
I have always found the mag release of the SPAMF a bit awkward to reach with my thumb. I like paddle releases so I modified it a bit. I have made a version that has the original release part still intact, and one where i removed it. Not…
Multiple other designers have tried these but I really wanted to make some that are tested and have pictures. I tried some on thingiverse but those were too tight so I just took caliper measurements and designed these directly off of the…
Won't match the metal vanguard breech in performance, but should be a slight improvement over the original printed part, and of course allows for loading in mags when the breech is closed.
For this, you will need to have a Super SPAMF frontend, and this can work with the stock SPAMF barrel (about 4in) or any length you choose. To use the stock length barrel you will need the “Standard Length Collet“ file or the “Standard…
Posted with the permission of GavinFuzzy. This replaces the standard SPAMF magwell and magazine releases. Side-plates attach with two 4-40 screws each and the release is tensioned with a short length of elastic. Basically I started with…
Herbmeister Created an excellent model for the falconfire grip scales, especially noteworthy is its breakaway support and printability features. Also big Thumbs up for Providing .step files. The fit was almost perfect for me and i only…
I designed this model because I got tired of using my stock Super SPAMF foregrip, but didn't like the aesthetics of the Super Special SPAMF foregrip. This serves the same purpose, but doesn't compromise the aesthetics of the design of the…
Un-pump grip your pump grip SPAMF. Installs using existing hardware. Print as imported, no supports needed. Optionally add two strips of grip tape for more grip!
12mm and 20mm 3m through bolt standoffs for use in the SPAMF. Two of each is required. Sand to fit as needed. Recommended to print all 4 upright on a raft simultaneously.
Designed to be used with the Super SPAMF's Barrel_Super_2PC_Main & Barrel_Super_2PC_Tip_Compensated. Printed @ 0.20mm w/Barrel face down. Supports are optional as the lower portion of the grip was sanded down. Uses 12mm Nerf screws, and…
Custom grip, requires 1 toy screw to retain the grip to the front grip keeper
Sillycollet front ends for your spamf! Works with standard 16mm OD barrels and whatever silly collet you like!
I broke a plunger on my SPAMFed Falconfire, due to having too high of a springload, so I designed a replacement. It comes in two parts- the plunger, and the cushion, but only the plunger itself is required to function. The plunger should…
A muzzle i designed for the spamf with the shortened barrel by Eric1218 on Thingiverse: https://www.thingiverse.com/thing:5132605 This model does not require a brim or supports and is best printed at a 0.15 mm layer height. I have…
I reverse designed a priming slide for the Super SPAMF based on the geometry of the priming bars and the SPAMF breech. With this piece and a few others you can find floating around the Internet, you will be able to build a Super SPAMF…
I love the Super Special SPAMF by DetroitDartworks, which is based on the Super SPAMF by OldFusionDesigns, which is based on the SPAMF by Gavinfuzzy, which is an overhaul modification to the Nerf Falconfire in and of itself. I already…
It's a little bracket that clamps onto the bottom of the Falconfire handle (beneath the grip scales) and has a slot for u-channel aluminum like on the FLAK stock. The grips I modified are not mine to share, so I'm not sure how useful this…
Allows you to connect ex bcars to the front of the spamf without needing a longer barrel, doesnt make it ugly when no bcar installed I recommend using a file or sandpaper on the inside of the bcar or last 15mm of barrel tip depending on…
Version 2 of my holster for the SPAMF. Uses velcro from velcro bundles in addition to straps that come from traditional holsters. I have not printed this myself yet, but it should work. I based it off of my older design. I use this…
