Nerf Falconfire/SPAMF Plunger
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Compatible plunger for the Nerf Falconfire.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 19
- Makes
- 0
- Views
- 110
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Toys
- License
- Creative Commons — Attribution
I broke a plunger on my SPAMFed Falconfire, due to having too high of a springload, so I designed a replacement.
It comes in two parts- the plunger, and the cushion, but only the plunger itself is required to function.
The plunger should be printed in a tough filament such as PETG, and the cushion should be printed in a flexible filament such as TPU.
The two parts are combined using glue. Please allow glue to fully dry and cure before putting into blaster.
Was designed to fit the original Falconfire o-ring, but may need some teflon tape for a perfect seal.
I release all my models under Creative Commons Attribution, but if you find my models helpful, feel free to tip me here: https://ko-fi.com/derpynate