1 / 9
Toilet paper dispenser and storage / holder
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Two-roll toilet paper holder. Can be used as dispenser.
- Ocena
- 5 / 5
- Polubienia
- 50
- Pobrania
- 217
- Wydruki
- 1
- Wyświetlenia
- 974
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bathroom
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (4)Wydruki i komentarze (Wydruki: 1) (Komentarze: 4)Remiksy (0)Kolekcje (85)Powiązane
Why
I made this for the bathroom in our boat, as both storage for two rolls and a central rod to make it easy to pull more paper.
Can be just as good in a regular bathroom :-)
The model
- Four versions with optional rod, with or without screw holes.
- The bottom of the holder is shaped to let the rolls rotate (the version with rod).
- The printed example has a boat logo. This model has no logo.
- Can be mounted using double sided tape/glue or screws (the back side is flat)
- The version with rod is slightly larger (same height) to let the rolls rotate freely supported by the rod.
- Fits 125mm rolls (may not fit 5in rolls)
To print
- The model has smooth lines and benefits from variable layer height (not required).
- Height 231mm
The example print
- Used white generic PLA from ClasOhlson