1 / 9
Toilet paper dispenser and storage / holder — image 1
1 / 9

Toilet paper dispenser and storage / holder

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Two-roll toilet paper holder. Can be used as dispenser.

Rating
5 / 5
Likes
50
Downloads
217
Makes
1
Views
974
Reviews
1

Updated at source:

Model information

Category
Bathroom
License
Creative Commons — Attribution — Noncommercial — Share Alike

Why

I made this for the bathroom in our boat, as both storage for two rolls and a central rod to make it easy to pull more paper. 

Can be just as good in a regular bathroom :-)

The model

  • Four versions with optional rod, with or without screw holes.
  • The bottom of the holder is shaped to let the rolls rotate (the version with rod).
  • The printed example has a boat logo. This model has no logo.
  • Can be mounted using double sided tape/glue or screws (the back side is flat)
  • The version with rod is slightly larger (same height) to let the rolls rotate freely supported by the rod.
  • Fits 125mm rolls (may not fit 5in rolls)

To print

  • The model has smooth lines and benefits from variable layer height (not required). 
  • Height 231mm

The example print

  • Used white generic PLA from ClasOhlson

Tags