Xacto Blade Replacements Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I have many different sizes/shapes of X-acto blades that have come with various sets I have bought. I got sick of…
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 37
- Wydruki
- 0
- Wyświetlenia
- 298
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
I have many different sizes/shapes of X-acto blades that have come with various sets I have bought. I got sick of having several different cases with blades, many of which could only hold one blade per spot because they used a ceramic magnet that wasn't that strong. I made this to hold a wider variety of blades, with room for multiples of each blade.
The tension is made using a printed piece of 910 Alloy Nylon and folding it. This can also be made by printing the same design on paper and using it as a template on a soda can or some similar thin metal then folding the tabs over. I had the 910 Alloy available and it was easy so that is what I went with.
Category: Tool Holders & Boxes