Multiboard Reinforced Bolt on Gridfinity Shelves
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Gridfinity plate shelves with holes to bolt to multiboard with "big thread" multiboard bolts.
- Ocena
- 5 / 5
- Polubienia
- 41
- Pobrania
- 217
- Wydruki
- 2
- Wyświetlenia
- 2324
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
As the summary says, a set of gridfinity compatible plates that can be bolted to multiboard using “big thread” multiboard flat head bolts. Side walls should help reinforce, but I haven't tested for actual capacity. Bottom of plate also accepts big thread multiboard bolts (hanging a hook or something?) and push-fit magnets for bin magnets.
I used the 9mm, big thread, flat head, push fit hole, shank bolts in the photo, and they sit flush against the rear side of the panel.
The teardrop cutouts help to print without any support required.
Based on
- Gridfinity by Zach Freedman (https://thangs.com/designer/ZackFreedman)
- Multiboard by Keep Making (https://www.multiboard.io/)