1 / 4
BentoBox v2.0 fan duct for Creality K1 (side mount) — zdjęcie 1
1 / 4

BentoBox v2.0 fan duct for Creality K1 (side mount)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

It's a BentoBox v2.0 fan duct for Creality K1 side mounted

Ocena
5 / 5
Polubienia
58
Pobrania
218
Wydruki
3
Wyświetlenia
3827
Oceny
3

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

It's a BentoBox v2.0 fan duct for Creality K1, inspired from this model https://www.printables.com/fr/model/641340-bento-box-v2-fan-duct-for-creality-k1

The goal is to mount the fan duct on the side instead of the back to improve the air flow inside the case.

Two longer screws BHCS are required (M4x10 or M4x12) to attach the model to the lower frame.

If the BentoBox is too close of the bed, you can use washers below the model.

I have connected the fans directly to the PSU. The BentoSwitch is optional.

You can find more information about the BentoBox v2.0 here :
https://www.printables.com/fr/model/272525-bentobox-v20-carbon-filter-for-bambu-lab-x1c-enclo

---

If you like my work, don't hesitate to support me by paying me a ☕

https://ko-fi.com/fred2u

Tagi